CS9400-OR Accelerometer Only
The CS9400-OR only uses accelerometers to capture elevation profiles. The SSI electronics use a gain function to very accurately match the profiles from an inertial profiler. The installation and set up of this system is simple. Only a GPS antenna is outside of the vehicle. The collection speed is between 5-74mph. Use this system on roads with narrow passages where a laser sensor would not be practical.
CS9740 Grade Profiler
Additionally, a model of CS9740 is a longitudinal grade collection system which includes a sonic sensor and mounting hardware for a tow hook or a 2-inch hitch receiver. The system can be connected to a INS unit which returns PPK GPS corrections. This system can be used to report running grade and cross-slope all while being transported in a portable case.
CS8770 Survey Profiler
Based on the inertial profiler of the same model family, the SSI CS8770 is on a Polaris platform with 2-4 lasers mounted at least 40 inches (1016mm) off of the ground. The system uses the same collection software as the CS9500. It can be paired with a Zero-Speed inertial profiler for 0-100mph collection speeds for longitudinal profiles.
CS9500 Survey Profiler
Based on the inertial profiler of the same model family, the SSI CS9500 is mounted on a truck with 6 lasers mounted at least 40 inches (1016mm) off of the ground. The system uses the same collection software as the highway CS9500. It can be paired with a Zero-Speed inertial profiler for 0-100mph collection speeds for longitudinal profiles.